Call us 24/7 at 800-860-6272
or email us
We've all seen the movies where adventurers are making their way through a jungle, and one steps into quicksand and is quickly sucked down beneath the surface. But what is quicksand and how does it trap people?
Quicksand occurs when the right type of sand becomes super-saturated with water. Sand often becomes super-saturated with water when it is deposited in a sink hole or hollow in the ground that is made out of material (such as clay) that does not allow the water to drain from the sand. The sand and water make a soupy mixture that often looks solid on top, but when it is agitated (by being stepped on) it turns into a liquid. The most likely places to find quicksand are along beaches, lakes, rivers, marshes, and swamps because there is a ready supply of water there. However, quicksand can also be formed by underground springs or runoff water from heavy rains.
Making real quicksand can be tricky. The grains of the sand need to be round in shape and the same size. Ordinary playground sand (the type you can buy in a store) rarely meets this standard. Since quicksand is normally found along beaches, marshes, and other wet areas, if you can find sand here, you probably have sand with the right grain type to make quicksand.
A much easier and more dependable way to make "quicksand" is to use cornstarch instead of sand.
What To Do
Whenever you gently and slowly moved your hand through the cornstarch-water mixture, it behaved like a liquid. But when you tried to move your hand through it quickly or hit the substance very hard, it behaved like a solid. Weird, huh? But the way this cornstarch-water mixture behaves is very similar to how quicksand behaves.
The way that a liquid flows or moves is affected by its viscosity. Quicksand and the cornstarch-water mixture are both non-Newtonian fluids, meaning that their viscosity changes with the type of force applied to it. Unlike quicksand, the viscosity of Newtonian fluids (fluids, such as water and honey, that follow Sir Isaac Newton's law of viscosity) is dependent only on the temperature and pressure of the fluid, not the force applied to it. For instance, warm honey flows much more freely (less viscous) than cold honey (more viscous).
Since the ability of a non-Newtonian fluid to move depends on the force or stress applied to it, these fluids do not act like ones we are more familiar with (e.g. water). A light pressure, such as pouring or gently pressing the cornstarch-water mixture, allows it to move like a liquid. But a high pressure, such as punching firmly, causes the cornstarch-water mixture to act as a solid. This same principle applies to quicksand. When it is lightly stepped on by the unaware adventurer, the quicksand liquefies and the foot of the adventurer starts to sink. Panicking, the adventurer tries to quickly pull his or her foot out, only to find that now the quicksand is acting like a solid, encasing the foot all the more firmly in this unpredictable substance.
But don't worry about get sucked down into quicksand like you see in the movies. Although humans do initially sink when they first enter quicksand, they cannot sink all the way (only to about chest deep). This is because humans are less dense than quicksand. One way to get out of quicksand is to lay back on it and float, much like you would do in regular water. If you have just a foot stuck in quicksand, gently move the foot back and forth, adding water along the side of your leg. This will help the quicksand to act more like a liquid and release your foot. Click here to learn more.